GARZA SMART

---

Welcome to the future of the Internet of Things (IoT). With the acquisition of this "smart" product of the Garza Smart range, you open a world of possibilities when controlling multiple aspects of the operation of your home from a single application or through voice instructions when, how and where you want. Just talk to Alexa on your Amazon Echo, Echo Dot, Amazon Tap or Echo Show.
Download and installation of Garza Smart App
Download Garza Smart App from Google Play or Apple Store and install it on your phone or tablet (Minimum required Android 4.0 or iOS 8.0 or higher). Once installed, you must create a user account. For this you must select your geographical area, and as a user you can use your phone number or an email account. You will receive a numeric key by SMS (if you registered with mobile) or by email (if you registered with an e-mail), which you must enter in the application to continue. Next, enter an access password for your user, which should have between 6 and 20 characters.
App configuration and device synchronization
Once you access the home screen of Garza Smart App, you must create a "Device Family", and enable the locations where they will be installed.
Make sure that the phone or tablet where you have installed the application are connected to your WiFi network, and that the place where you are has good coverage. To synchronize the device with your family, you must connect it to the electrical network and enter the pairing mode by pressing the power switch, if you have it, for 5 seconds, or turning it on and off 5 times (in the case of light bulbs). The indicator light will begin to flash rapidly, and the pairing mode is activated.
Now, select in the application the type of device you want to add by clicking on the "+" icon in the upper right corner. A search confirmation screen will show and you must press the "Accept" button. The new screen will ask you to enter your WiFi password and accept by pressing the button. At this time the application will search for your new device and add it to your family at the end of the configuration.
If after the search the device was not linked to the application, repeat the steps above.
Once you have added your device to the family, you can access it in a control screen, from which you can assign a name, manage the different functions (on, off, timings, etc.) and create different scenarios, through the App from anywhere in the world.
To share the device with the rest of the family members who have Garza Smart App installed, you must access the option "Family Management", click on the family you want to share, and click on the "share equipment" option. Once you have selected the devices you want to share, you must accept and automatically appear in the App to the family members with whom you share them.
How to link your Garza Smart devices with Amazon Alexa
Download and install Alexa. In the "Home" menu select the "Skill" option. Search Garza Smart in the search bar and activate it.
Confirm your region, enter your Garza Smart account and password (not Alexa's) in the new window and click "Link now". Click on "Authorize" in the new window that will be displayed.
Click on "Discover devices". It will take a few moments for the system to pair with each of them. At this time, your Garza Smart devices will be linked with Alexa.
Then you can access your devices on the Alexa Smart Home page. By clicking on the "Groups" option, you can assign different groups with the desired name.
Now all setup is finished.
You can enjoy the voice control on your home devices like these:
“Alexa, turn on kitchen light"
“Alexa, turn off kitchen light"
“Alexa, dim living room light"
“Alexa, brighten living room light"
“Alexa, set the living room light to 20 percent"
“Alexa, set bedroom light to Blue"
“Alexa, turn on bedroom air conditioner"