You can use the Airmega skill to ask Alexa about the indoor air quality, change the fan speed, or turn off the light without lifting a finger. Here are the steps to get started.
1. Alexa device paired and connected to network.
2. Airmega (300S/400S-ONLY) paired and connected to network (https://www.cowaymega.com/faqs-voice/)
3. Open the Alexa app.
4. Search "Airmega" under the "Skills" tab
5. Click "Enable Skill" on Airmega in-app. then login using the Airmega ID/PW to verify device(s)
6. If connected, you'll receive a message of "Your airmega skill was successfully linked"
7. Test the Airmega commands as you wish!
Alexa ask airmega to turn on the device Alexa ask airmega to turn off the device Alexa ask airmega to activate the smart mode Alexa ask airmega to activate the sleep mode Alexa ask airmega to change the fan speed to Level one Alexa ask airmega to change the fan speed to Level two Alexa ask airmega to change the fan speed to Level three Alexa ask airmega to turn the light on Alexa ask airmega to turn the light off Alexa ask airmega to set the one hour sleep timer Alexa ask airmega to set the two hour sleep timer Alexa ask airmega to set the four hour sleep timer Alexa ask airmega to set the eight hour sleep timer Alexa ask airmega about the filter lifetime Alexa ask airmega about the indoor air quality
If you have more than one Airmega in your home, you will need to give each of your Airmega units a nickname in order to control them using Alexa. This name will be used every time you issue a command to Alexa. Below please find a list of valid nickname forms. These nicknames must be applied in order, so that the first nickname in the list identifies your first Airmega unit, while the second nickname in the list identifies your second, and so on.
4) Number: Airmega One, Airmega Two, Airmega Three, Airmega Four, Airmega Five, Airmega Six, Airmega Seven, Airmega Eight, Airmega Nine, Airmega Ten (Alexa sometimes may confuse “Airmega Two” with “Airmega to” and “Airmega Four” with “Airmega for”. The numerical sequence is least recommended when making commands in multi-device setting.)